This USA barrel hinge is a heavy duty black hinge that has a welding pad of 1-1/2"" by 3"". It is 7"" high and weighs 7 lbs. A substantial hinge to hold up a substantial gate. Enjoy a quantity discount if you purchase 12 or more.
Main7" Economy Barrel Hinge in a matte black finish. Hinge has been lubricated with standard machine grease both inside and out for best performance. Each hinge has a 1-1/2" x 3" weld pads, 7" high, and weighs 8 lbs. Enjoy a quantity discount when you buy 16 or more.
A King Kong barrel hinge that is 7"" high is built for those heavy duty jobs where no other hinge will do. This hinge can support up to 3000 lbs. The barrel is 2-1/2"" in diameter. There is a 1-1/4"" stainless steel pin and there's a 3-3/4"" space between post and gate when installed.
This steel weld on hinge is 7-3/4"" with a 5/8"" pin and a brass grease fitting and ring. Weight capacity is 1000 lbs. Sold as a pair and each pair weighs 2.99 lbs. Receive a quantity discount when you buy 10 or more and 24 or more.
A galvanized steel J-bolt that is made for hanging gates. There's a 3/4"" bolt that is 7"" long. It is threaded the full length of the bolt for ease of installation. It comes with 2 nuts. It weighs 1.444 lbs. Earn a quantity discount when you buy 60 or more.
Forged Steel Barrel Hinge with Steel Pins. 7/16" Pin, 3/4" Diameter, 6" H, .71 lbs
A 7"" steel weld on hinge with a steel pin. There's a brass grease fitting and a brass ring. The pin is 1/2"" and the barrel is 13/16"" and it weighs 2.03 lbs. Gain a quantity discount when you buy 10 or more and again at 25 or more.
This butt hinge is made from solid steel and has a tight 7/16"" pin and 2-11/16"" leaf size. It has a non-swaged surface and weighs 6 lbs. The hinge is for extra heavy duty applications. Enjoy a quantity discount when you buy 10 or more.
This rectangular steel block hinge uses a stainless steel pin and is 7"" high and weighs 8.6 lbs. and can hold up to 800 lbs. Orders are shipped the same day. Enjoy a quantity discount when you order 12 or more.
D&D Technologies Tru-Close Adjustable Hinge, Metal/Wood, No Legs. 3-7/8" x 3-3/4", 1/4" - 7/8" Gap Variance, 3/4" Gap. Molded Polymer Plastic.
This is a block hinge with an aluminum male and female steel combination. The pin is stainless steel and the hinge is 7"" high and weighs 6.5 lbs.