Rectangular steel block hinges that are 5"" high with a 5/8"" stainless steel pin. These hinges work well on heavy gates as the steel is very strong. Each hinge weighs 3.5 lbs. Receive a quantity discount when you buy 12 or more.
This heavy duty hinge is 8"" high with a 3/4"" stainless steel pin. Use these block hinges on those heavy gates to prevent sagging. These block hinges are sold in pairs. Each hinge weighs 19 lbs. Receive a quantity discount when you buy 12 or more.
This rectangular steel block hinge uses a stainless steel pin and is 7"" high and weighs 8.6 lbs. and can hold up to 800 lbs. Orders are shipped the same day. Enjoy a quantity discount when you order 12 or more.
Square Block Hinge. 4", 1/2" Stainless Steel Pin, 3.5 lbs
A 5/8"" adjustable J-bolt ball bearing hinge. This hinge supports up to 300 lbs. The bolt is 4-3/8"" and the pad is 2-3/8"". Enjoy a quantity discount when you buy 12 or more.
This is a block hinge with an aluminum male and female steel combination. The pin is stainless steel and the hinge is 7"" high and weighs 6.5 lbs.
A sealed steel bearing hinge for use on gates for pedestrian traffic or light use. Weight capacity is 500 lbs. The bearings are sealed so no greasing is necessary. Sold in pairs these hinges work for round or flat posts.
These rectangular aluminum block hinges are 7"" with a 3/4"" stainless steel pin. The block is 1-1/4"" x 1-3/4"" and weighs 3.8 lbs. Receive a quantity discount when you buy 12 or more.
This Sure-Close hinge is made by D&D Technologies and provides peace of mind that the gate is closed. This small hinge is concealed and easy to install. The weld on steel brackets are included and the hinge is flush mounted. Maximum gate weight for self-close feature is 180 lbs. Sold in pairs.…
Main7" Economy Barrel Hinge in a matte black finish. Hinge has been lubricated with standard machine grease both inside and out for best performance. Each hinge has a 1-1/2" x 3" weld pads, 7" high, and weighs 8 lbs. Enjoy a quantity discount when you buy 16 or more.
A Tru-Close adjustable hinge by D&D Technologies has no legs. It is made of super strong polymer construction with stainless steel components. Easy tension adjustment. Maximum gate weight is 132 lbs. Sold by the pair, each hinge is 3-1/2"" x 5"" with a 1/4"" to 1"" gap variance. Fasteners are not…
This aluminum block hinge is perfect for your next fence and gate project if you are using aluminum balusters. The rectangular blocks are 5"" high, 1"" deep and 1-1/4"" wide. Hinges are sold in pairs and each hinge weighs 1.6 lbs. Receive a quantity discount if you buy 12 or more.
