This rectangular steel block hinge uses a stainless steel pin and is 7"" high and weighs 8.6 lbs. and can hold up to 800 lbs. Orders are shipped the same day. Enjoy a quantity discount when you order 12 or more.
MainThis barrel hinge is made in the USA and is 5" high, with a 1"x2" weld pad, with a 1-3/4" installation gap. The hinge weighs 2.75 lbs. All hinges are sold in pairs. Enjoy a quantity discount when you order 22 or more.
These solid steel hinges are bright steel with a tight 5/16"" pin. These are standard duty hinges with no screw holes. These hinges are weldable and sold by the pair. Swaged surface with a narrow width, 2-1/4"" x 3-1/2' x .086"". Each hinge weighs .602 lbs. Enjoy a quantity discount when you…
A King Kong barrel hinge that is 7"" high is built for those heavy duty jobs where no other hinge will do. This hinge can support up to 3000 lbs. The barrel is 2-1/2"" in diameter. There is a 1-1/4"" stainless steel pin and there's a 3-3/4"" space between post and gate when installed.
This USA barrel hinge is a heavy duty black hinge that has a welding pad of 1-1/2"" by 3"". It is 7"" high and weighs 7 lbs. A substantial hinge to hold up a substantial gate. Enjoy a quantity discount if you purchase 12 or more.
This barrel hinge needs to be welded on and will support a gate weighing up to 240 lbs. The pin and ring are made of brass and do not require a grease fitting. This hinge is 3-3/16' long with a 5/16"" pin and a barrel size of 5/8"". Each hinge weighs .4 lbs. Receive a quantity discount if you buy 10…
This bright steel butt hinge is weldable and has no screw holes. The hinge is 4"" x 4"" x .097"". There's a tight 3/8"" pin. These hinges are standard duty hinges. Surface is swaged and each hinge weighs 1.1 lb. Earn a quantity discount when you buy 10 or more and 50 or more.
Main7" Economy Barrel Hinge in a matte black finish. Hinge has been lubricated with standard machine grease both inside and out for best performance. Each hinge has a 1-1/2" x 3" weld pads, 7" high, and weighs 8 lbs. Enjoy a quantity discount when you buy 16 or more.
This adjustable J-bolt ball bearing barrel hinge can support 600 lbs. The bolt is 6-3/4"" long with a 3-3/8"" pad. The hinge is painted black.
A spring hinge with single acting. Made of 14 gauge steel so will work perfectly if welding, but also contains screw holes if needed. The hinge is 1/4"" thick when closed. Hinge includes a full mortise template. The hinge is non-handled. Sold as a pair and each pair weighs 8 lbs. Earn a quantity…
A roller bearing hinge that is 4-1/4"" high, 2"" wide, and has 4-1/4"" gate clearance. This heavy duty hinge can support up to 2000 lbs of gate. All hinges sold in pairs.
A 7"" steel weld on hinge with a steel pin. There's a brass grease fitting and a brass ring. The pin is 1/2"" and the barrel is 13/16"" and it weighs 2.03 lbs. Gain a quantity discount when you buy 10 or more and again at 25 or more.