7-E3
Tuscany Classic Hand Forged Railing Panel. For Pitched, Convex Rail (stairs go up and curve left). For 36 to 48 Degree Inclines. 1/2" Solid Square Material. Round Scroll Ends, Banded Together in 6 Places. 10" W, 42" H, 13.9 lbs
|
7-C2
Tuscany Classic Hand Forged Railing Panel. For Pitched, Concave Rail (stairs go up and curve right). For 20 to 36 Degree Inclines. 1/2" Solid Square Material. Round Scroll Ends, Banded Together in 6 Places. 10" W, 42" H, 12.5 lbs
|
7-A2
This railing panel is made for concave stairs that go up and to the right. The panel design is classic Tuscany. The panel is made from 1/2"" solid square material with round scroll ends that are banded together in 6 places. The panel is 38"" high, 10"" wide and weighs 14.8 lbs.
|
7-A3
This classic Tuscany railing panel is made of 1/2' solid square material. The round scroll ends are banded together in 6 places. This panel is convex and made for stairs that go up and to the left. Each panel is 38"" high, 10"" wide and weigh 13.3 lbs.
|
7-B1
This railing panel is designed in the classic Tuscany style and includes round scroll ends that are held together in six places by bands. The panel is to be used in straight and level areas. Check out the craftsmanship in the hand-forged construction using 1/2"" solid square material.
|
|
7-C3
Tuscany Classic Hand Forged Railing Panel. For Pitched, Convex Rail (stairs go up and curve left). For 20 to 36 Degree Inclines. 1/2" Solid Square Material. Round Scroll Ends. Banded Together in 6 Places. 10" W, 42" H, 13.7 lbs.
|
7-E1
This classic Tuscany panel is made for straight or pitched rails. The angle can be from 36-48 degrees. The stock is 1/2"" solid square with round scroll ends banded together in 6 places. It's 42"" high, 10"" wide and weighs 14.6 lbs.This classic Tuscany panel is made for straight or pitched rails.…
|
7-D1
A classic Tuscany railing panel that includes scroll ends banded together in four places. This panel can be used in straight, pitched applications with an angle of 20-48 degrees. Made of 1/2"" solid square material. Panel height is 40"", width is 10"" and it weighs 12.1 lbs.
|
|
|
7-D2
A classic Tuscany hand forged railing panel that is for concave railing that goes up and curves to the right. This panel is for inclines of 20-48 degrees. The panel is made of 1/2"" solid square material and the scrolls are banded together in four places. This Tuscany panel is 42"" high, 10"" wide…
|